HOT PARTS
Keep your factory humming with these replacement parts!
part_number : SPTH110501
description_1 : Modified Inner XP Robot Case
lead_time : 3 weeks
XP_box_mod
part_number : MTR-NSK-RZ0810FN507
description_1 : NSK Motor Refurbishment
lead_time : 3 weeks
NSK Motor Refurbishment
part_number : VHP_VACUUM_HUB
description_1 :
VHP vacuum hub assembly
lead_time : 2 weeks
Type: Bearings
Vacuum hub assembly with magnets part_number : R30002
description_1 : Reworked 300mm Centura Right
lead_time : 14 days
Reworked 300mm Centura Right
part_number : A1200
description_1 : VHP Wrist Asm, Full-body pivots
lead_time : 14 days
VHP Wrist Asm, Full-body pivots
part_number : A50011
description_1 : Producer Arm Left full
lead_time : 14 days
Producer Arm Left full
part_number : P30103
description_1 : Housing cover, right
lead_time : 14 days
Housing cover, right
part_number : H81906
description_1 : HP+/HP+ Robot PM Kit
lead_time : 14 days
HP+/HP+ Robot PM Kit
part_number : H52194
description_1 : VHP Robot Bearing Kit, 200 mm
lead_time : 14 days
VHP Robot Bearing Kit, 200 mm
part_number : E8030
description_2 : Hub bearing, 440C hybrid, MAC, double shielded, 4-PT, for VHP hub
preferred_application : CVD
lead_time : 2 weeks
Type: Bearings
8" hub bearing, 4-PT, ceramic hybrid, double shielded, MAC, for Producer SE part_number : 0190-09290
description_1 : Quad serial communication board - Repair
lead_time : 3 weeks
Quad serial communication board - Repair
part_number : 0010-19900
description_1 : XP Waist Assembly, Fixed wing lower, Applied Materials
lead_time : 2 weeks
XP Waist Assembly, Fixed wing lower, Applied Materials
part_number : 41387
description_1 : Single Substrate Spin Processor, Material Natural Polypropylene (NPP), desktop version, for substrates up to 200 mm diameter, manual chemical dispense, 12.000 rpm, including: - Central dispensing syringe holder with integrated N2 diffuser - vacuum chuck A-V87-S96-PP-HD
lead_time : 10 weeks
Type: Coater
Spin coater, table top for 200 mm wafers part_number : R50008
description_1 : Producer robot, preassembled, MAC + Ti Bushings
lead_time : 14 days
Producer robot, preassembled, MAC + Ti Bushings
part_number : A3010F
description_1 : Housing 300mm with flags
lead_time : 14 days
Housing 300mm with flags
part_number : M0007
description_1 : Hardware Kit
lead_time : 14 days
Hardware Kit
part_number : EPI-501D
description_1 : Replacement ballast, threaded
lead_time : 1 week
Replacement ballast, threaded
part_number : R30003
description_1 : DBR 300 mm, no housings
lead_time : 14 days
DBR 300 mm, no housings
Happy customers say
Our Brands!
